34 Installation Note E8356-90001
In This Guide
Safety, Regulatory, and Environmental Information
-
regulatory agencies.
Instructions for Use
This product has been designed and tested in accordance with accepted
industry standards, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by
the user to ensure safe operation and to maintain the product in a safe
condition.
Install the instrument so that the detachable power cord is readily identifiable
and is easily reached by the operator.
The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of the
instrument. The front panel switch is only a standby and ON switch and is not a
LINE switch (disconnecting device).
Alternatively, an externally installed switch or circuit breaker (which is readily
identifiable and is easily reached by the operator) may be used as a
disconnecting device.
Table 1
The instruction documentation symbol. The product is marked with this symbol when it is necessary for the
user to refer to the instructions in the documentation.
This symbol indicates that the instrument requires alternating current (ac) input.
This symbol indicates separate collection for electrical and electronic equipment, mandated under EU law
as of August 13, 2005. All electrical and electronic equipment are required to be separated from normal
waste for disposal (Reference WEEE Directive, 2002/96/EC.
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is in the STANDBY position.
