Installation Note E8356-90001 21
In This Guide
Installing Your Analyzer
Step 9. Turn Off the Analyzer
To turn the PNA OFF, BRIEFLY press the front panel On/Standby switch. The
PNA will then begin to shutdown
Shutdown
The On/Standby indicator changes from green to yellow when power is Off.
The current instrument state is NOT saved to the PNA solid state drive.
When the PNA is powered ON, a full system boot-up is performed and the PNA
powers-up in the Preset settings.
1. Only in an emergency should the power cord be removed from the PNA
without first being put in Shutdown mode.
2. If the PNA is locked and you cannot operate the mouse or keypad, turn
OFF the PNA by pressing and holding the power button for at least four
seconds.
Repeatedly doing either of the following two actions may cause damage to
the PNA solid state drive.
