Keysight Technologies N8262A Скачать руководство пользователя страница 3

Страница: 3 / 673

Keysight N8262A Programming Guide

General Warranty

The material contained in this document is provided “as is,” and is subject to

being changed, without notice, in future editions. Further, to the maximum extent

permitted by applicable law, Keysight disclaims all warranties, either express or

implied with regard to this manual and any information contained herein,

including but not limited to the implied warranties of merchantability and fitness

for a particular purpose. Keysight shall not be liable for errors or for incidental or

consequential damages in connection with the furnishing, use, or performance of

this document or any information contained herein. Should Keysight and the user

have a separate written agreement with warranty terms covering the material in

this document that conflict with these terms, the warranty terms in the separate

agreement shall control. Duration and conditions of warranty for this product may

be superseded when the product is integrated into (becomes a part of) other

Keysight products. During the warranty period, Keysight will, at its option, either

repair or replace products which prove to be defective. The warranty period begins

on the date of delivery or on the date of installation if installed by Keysight.

Restricted Rights Legend

The Software and Documentation have been developed entirely at private

expense. They are delivered and licensed as “commercial computer software” as

defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991),

or DFARS 252.227-7014 (Jun 1995), as a “commercial item” as defined in FAR

2.101(a), or as “restricted computer software” as defined in FAR 52.227-19

(Jun 1987) (or any equivalent agency regulation or contract clause), whichever is

applicable. You have only those rights provided for such Software and

Documentation by the applicable FAR or DFARS clause or the Keysight standard

software agreement for the product involved.

Содержание N8262A


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N8262A

Отзывы:

Похожие инструкции для N8262A

Бренды по названию

Популярные бренды

Keysight Technologies N8262A, Руководство по программированию

Результаты поиска

Содержание N8262A

Отзывы:

Похожие инструкции для N8262A

Бренды по названию

Популярные бренды