Keysight Technologies L4490A Скачать руководство пользователя страница 147

Страница: 147 / 160

Keysight L4490A/L4491A User’s Guide

147

Additional Operating Information

Note that during a reset, all channel states are actuated resulting in possible

delays during the execution of:

*RST

SYSTem:CPON

ROUTe:RMODule:DRIVe:SOURce

Verifying Switch States

Many switches and attenuators have built-in switch position indicators. The

indicators can be used to drive LED position indicators on the distribution

boards. The L4490A/L4491A checks the switch position indicator against the

SCPI command last sent to provide verification of the state.

Enabling Verification

Following a preset of any of the distribution boards, electronic verification is

disabled and the switch state is assumed to be the last open/close state driven.

Verification is enabled through the channel configuration window (Chapter 4) or

using the command:

ROUTe:CHANnel:VERify:ENABle

If a switch operation appears to have failed while electronic verification is

enabled, an error is generated at the time either of the commands:

ROUTe:CLOSe

ROUTe:OPEN

is executed. If either of these

commands specify a channel list (i.e., more than

one channel), the verification is performed after all open/close operations have

completed. An error is generated for each channel operation that did not verify

correctly.
With electronic verification enabled, the commands:

ROUTe:CLOSe?

ROUTe:OPEN?

return the actual (verified) hardware state of the specified channel(s), which may

or may not correspond to the programmed state.
Electronic verification of switch position will slow performance of the verified

channels. Additionally, if you have enabled the command overlap function using

the command:

ROUTe:OPERation:OVERlap:ENABle

any overlapping is suspended until position verification is complete.

Содержание L4490A

































































































































































Результаты поиска

Содержание L4490A

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies L4490A, Руководство пользователя

Результаты поиска

Содержание L4490A

Отзывы:

Бренды по названию

Популярные бренды