26
Keysight E8740A-060 Start-up Guide
Figure 12
Spectrum Analyzer screen after the wideband IF output is activated
6
Observe the output signal from EXT IF
Out on the VSA software.
a
Run VSA89600 on the oscilloscope, if
the software did not start
automatically when launched. Note
that some working knowledge of VSA
software is required to use this section
of the guide. Please refer to VSA89600
help documentation to learn how to
operate the software.
b
In the
MeasSetup
Measurement
dialog select the scope as the current
Vector
measurement.
The VSA software should have been
installed and configured to run on the
DSOS8094 as local host.
Step
Action
Notes
Содержание E8740A-060
