MY20K10-02_1.0_10.11.2020
70
Troubleshooting, fault clearance and repair
9.2.4
Tyre clearance check
The tyre needs to be checked each time a
suspension fork tyre is changed to another size.
1
Release pressure from the fork.
2
Press fork together fully.
3
Measure the gap between the top of the tyre
and the crown's lower surface. The gap must
not be less than 10 mm. If the tyre is too large,
the tyre will touch the crown's lower surface if
the fork is fully pressed together.
4
Release pressure on fork and pump it up again
if it is an air suspension fork.
5
Take into account the fact that the gap will be
smaller if there is a guard. Check again to
ensure that there is sufficient clearance for the
tyre.
