![Kettler Velossi 2.0 K01 Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/kettler/velossi-2-0-k01/velossi-2-0-k01_operating-and-maintenance-instructions-manual_1958693044.webp)
MY20K10-02_1.0_10.11.2020
44
Operation
6.12
Rechargeable battery
Switch off the battery and the drive system before
removing or inserting the battery.
6.12.1 Removing the battery
1
Use your right hand to push the battery up into
the frame.
The lock hook is disengaged in the frame.
2
Turn the key anti-clockwise until it stops to
unlock the battery.
3
Press the lock mechanism.
4
Remove the battery from the down tube.
5
Turn the key back to its original position.
6
Remove the key. If the key remains in the lock,
there is a risk of it breaking – when the crank
turns, for example.
6.12.2 Inserting the battery
1
Insert the battery into the frame from the top.
2
Swivel the battery into the down tube. Apply a
little pressure to push the battery into the frame
until you hear and feel it click into place.
3
Check the battery is firmly in position.
6.12.3 Charging the battery
The battery can remain on the S pedelec or can
be removed for charging.
1
Remove the rubber cover from the battery.
2
Connect mains cable to the charger and plug
into a socket.
3
Connect the charger plug to the battery
charging socket.
4
Set the toggle switch on the charger to "On".
5
The green LED on the charger will flash quickly
at a steady rate for about 5–10 seconds. If the
display is connected to the S pedelec, it will
switch on for a few seconds before it switches
off automatically again.
6
After about 5 seconds, the LEDs on the battery
will light up in the following pattern:
• All 5 LEDs flash in sequence:
Battery is charging. The charge level is
between 0 and 20%.
• 1 LED lights up continuously; LEDs 2–5 flash in
sequence:
Battery is charging. The charge level is
between 20 and 40%.
• 2 LEDs light up continuously; LEDs 3–5 flash in
sequence:
Battery is charging. The charge level is
between 40 and 60%.
• 3 LEDs light up continuously; LEDs 4–5 flash in
sequence:
Battery is charging. The charge level is
between 60 and 80%.
• 4 LEDs light up continuously; LED 5 flashes:
Battery is charging. The charge level is
between 80 and 100%.
Notice
If you leave a key inserted when riding or
transporting the S pedelec, it may break off or the
locking system may open accidentally.
Remove the key from the battery lock
immediately after use.
We recommend that you attach the key to a
key ring.
Notice
If an error occurs during the charging process,
a system message is displayed. Remove the
charger and battery from operation
immediately and follow the instructions.
Contact your specialist dealer if you are
unable to recharge the battery or it is
damaged.