Kessel 917824, Инструкции по установке, эксплуатации и обслуживанию

Страница: 42 / 196

42
Note: After installation of the grease separator, fill it completely with water, check the installation height and correct
if necessary! When the separator is completely filled with water, the control unit must display “0 cm” in Sonic-
Control manual operation. If mechanical correction is not possible, carry out change in “Parameters > level
compensation” (3.1.7 Menu guidance control unit). The parameters are password-protected – please contact
KESSEL Customer Services at +49 (0) 8456/27462.
3. Installation and Assembly
Erdeinbau Artikelnummer NS
Abstand Oberkante
unterer Finger zu
Unterkante Auslauf
(Wasserlinie)
Alarmschichtdicke
in cm Voralarmschichtdicke
in cm bei 80%
max. Schlammschicht-
dicke in cm = 50% des
Schlammfangvolumen
Euro G 93002 / 80 / 120 B und D 2 50 cm 17 14 15
93004 / 80 / 120 B und D 4 50 cm 17 14 27
93007 / 120/170 B und D 7 48 cm 17 14 23
93010 / 120/170 B und D 10 48 cm 17 14 23
93015 / 120/170 B und D 15 56 cm 17 14 32
93020 / 120/170 B und D 20 56 cm 17 14 31
D
93925 120 / 170 B und D 25 50 cm 17 14 42
93930 120 / 170 B und D 30 50 cm 17 14 47
93935 120 / 170 B und D 35 50 cm 16 13 52
DIN 4040 G 98201 / 00 / 80 / 120 B und D 1 58 cm 16 13 46
98202 / 00 / 80 / 120 B und D 2 58 cm 16 13 54
98204 / 00 / 80 / 120 B und D 4 58 cm 16 13 54
9
Installtion
in the
ground
Article No.
Distance between the
upper edge of the
lower “finger” and the
lower edge of the out-
let (water line)
Alarm level layer
thickness in cm
Recommended pre-
liminary alarm level in
cm (= 2/3 of the max.
storage volume)
max. sludge layer in cm
( = 50% of sludgetrap
volume)