Kessel 917824, Инструкции по установке, эксплуатации и обслуживанию

Страница: 57 / 196

7. Errors and Malfunction
7.3 General faults:
Recognised fault Fault Cause Remedy
- Sensor is in the blind spot - Reposition the sensor
(see Page 11)
- Grease separator type / - Correct settings
and/or system type not set
correctly
Text message cannot be Faulty function of remote Faulty modem reception Step 1: Check basic reception
sent and/or remote servicing servicing possibility;
is not possible
Step 2: If no reception is
possible, then a modem
cannotbe used; if reception is
basically possible, replace the
modem
7.4 System faults
Recognised fault Cause Remedy
Odour pollution Leak in the cable duct through Tighten the cable screw connection in
faulty installation the tank wall so that it is odour-proof
(see the operating instructions of your
grease separator as well)
Water in the service room Leak in the cable duct through Tighten the cable screw connection in
faulty installation the tank wall so that it is “odour”proof
57
In the case that a control unit alarm notification can not be acknowledged, keeping the alarm button pressed for 5 seconds
will initiate a master-reset.