Kessel 917824, Инструкции по установке, эксплуатации и обслуживанию

Страница: 59 / 196

59
8. Switch unit
∆8.3.1 operating hours
Display of all system operating times.
8.3.2 Log book
Chronological display of incidents and faults (see also chapter 7 “Incidents and
faults / remedial measures”)
All changes made to the settings are saved at this point.
8.3.3 Control unit type
Display of system time, standard/nominal size, language and software status.
8.3.4 Servicing date
Display of the next necessary and last performed servicing.
Note: Data are only available if these have been stored in the “Settings” menu by
the servicing partner.
8.3.5 Current measured values
Pressing the OK key carries out a measurement of the current grease layer thickn-
ess.
8.3.6 parameters
Display of all set control parameters of the system It is not possible to change the
parameters in this menu.
8.3.7 measured data memory
Display of the last layer thickness and temperature stored (max. 400 values).
8.3.8 Disposal
Display of details of the last disposal carried out (if stored)
8.3 Information menu
Systeminfo Information
Servicing
Settings
Operating hours
Log book
Control unit type
Servicing date
Current
measured values
Parameters
Measured data-
memory
Disposal