KERN KERN YDB-03, Руководство по эксплуатации

Страница: 60 / 115

60 YDB-03-BA-e-2114
9. When connecting an optional printer, the result will be printed out. Printout
example see chap. 5.6.4.
10. Finish process by . Remove the sample.
Start more measurements at step 2.
To avoid corrosion damage, don't leave the immersion basket immersed in liquid
for a long time.
5.7.3 Determine density of floating solid bodies (d <1 g/cm
3
)
At solid material with density less than 1 g/cm
3
, a density determination with two
different methods is possible.
Method 1:
Implementation see chap. 5.6.2
As aid liquid is used a liquid with less density than that of the solid material, e.g.
ethanol approx. 0.8 g/cm
3
.
This method should be applied when the density of the solid is just slightly different
from that of the distilled water.
Using ethanol is not recommended, when the solid material is being attacked.
When working with ethanol, you must observe the applicable safety regulations.
Method 2:
Implementation see chap. 5.6.2, for “step 4“ place sample underneath instead of in
the filter dish.