Kenwood TS-990S, Инструкция по эксплуатации

Страница: 34 / 290

2 PANEL DESCRIPTION
2-8
Index Contents
MULTI/CH control
Rotate to increment or decrement the frequency step while in
VFO mode. {page 4-13}
Rotate to increment or decrement the channel number
while in Memory Channel mode or Quick Memory Channel
mode. {page 10-5}
Rotate to show the next or previous parameter while the
menu or a configuration screen appears.
"Multi/Channel" LED
Lights orange when changing the channel number, or when
the configuration item or parameter other than the frequency
is changed.
Tracking key: [TRACKING]
Press to toggle frequency tracking between active and
inactive. {page 5-3}
"TRACKING" LED
Lights green while frequency tracking is active.
{page 5-3}
Numeric and Band Selection Keypad
[ENT] key
Press to enter an operating frequency using the keypad
(numeric mode). After entering the frequency, press again to
apply the new frequency.
[0 (50)] to [9 (28)]
Press (in numeric mode) to enter a number. Press to enter a
number for the shift frequency while in split mode. Press, as
the band selection key, to select the frequency band.
[GEN1]
Press to select General Coverage Band 1.
[GEN2]
Press to select General Coverage Band 2.
[CLR]
Press to discard an entered value.
LO/WIDTH control
High Cut/Low Cut mode: Rotate to adjust the low cut
frequency. {page 6-4}
Shift/Width mode: Rotate to adjust the
bandwidth. {page 6-5}
"SUB" LED (HI/SHIFT LO/WIDTH controls)
Lights orange while the frequency can be changed using the
HI/SHIFT and LO/WIDTH controls. {page 4-7}
Notch Filter (Sub band) key: [NCH/SEL] (S)
Press to toggle the Manual Notch Filter for the sub band
between active and inactive. {page 6-10}
Press and hold to toggle the Manual Notch Filter bandwidth
for the sub band between normal and wide. {page 6-10}
"NCH" (Sub band) LED
Lights green while the manual notch for the sub band is
active. {page 6-11}
Automatic Notch Filter (Sub band) key: [A.NCH/SEL]
(S)
Press to toggle the Auto Notch Filter between active and
inactive.
Press and hold to open or close the Auto Notch Filter screen
for the sub band. {page 6-11}
"A.NCH" (Sub band) LED
Lights green while the Automatic Notch Filter for the sub
band is active.
Band Elimination Filter key: [BEF/SEL] (S)
Press to toggle the Band Elimination Filter for the sub band
between active and inactive. {page 6-12}
Press and hold to open or close the Band Elimination Filter
screen for the sub band. {page 6-12}
"BEF" (Sub band) LED
Lights green while the Band Elimination Filter for the sub
band is active.
[BC] (S)
Press to cycle the Beat Cancel for the sub band through Beat
Cancel 1, Beat Cancel 2 and Off. {page 6-14}
NOTCH SQL (S) control
NOTCH (S) control: Rotate to adjust the notch frequency
while the manual notch filter is active. Rotate to adjust
the center frequency while the band elimination filter is
active. {page 6-10}
SQL (S) control: Rotate to adjust the squelch level for the sub
band. {page 4-8}
NOTCH SQL (M) control
NOTCH (M) control: Rotate to adjust the notch frequency
while the manual notch filter for the main band is active.
Rotate to adjust the center frequency while the band
elimination filter is active. {page 6-10}
SQL (M) control: Rotate to adjust the squelch level for the
main band. {page 4-8}