Kenwood TS-990S, Инструкция по эксплуатации

Страница: 180 / 290

9-12
9 TRANSMIT FUNCTIONS
Index Contents
5 Press [OK] (F4) to exit.
Note:
◆ The saved file is named with the year, month, day, hour, minute and
second. Also, the extension is ".e q u".
Example: In the case of 30 seconds past 10:20, February 15, 2013,
the saved file name would look like: 20130215_102030.equ
◆ The name of the storage folder is as follows:
KENWOOD/TS-990/SETTINGS/TX_EQ
◆ You must remove a USB flash drive after executing the Safe
Removal of USB Flash Drive. {page 12-1}
READING THE CONFIGURATION DATA FOR THE TX
DSP EQUALIZER
You can read the configuration data for the TX DSP
equalizer from a USB flash drive.
REV
[F1]~[F7]
[TXEQ/SEL]
[ESC]
[MULTI/CH] [USB]
1 Press and hold [TXEQ/SEL] to open the TX Equalizer
screen.
2 Insert a USB flash drive, for which data files have been
saved, into the (USB-A) connector.
Once the USB flash drive is distinguished, the " " icon
appears at the center top of the main screen.
3 Press [ ] (F2) or [ ] (F3), or rotate the
MULTI/CH control to select the type of equalizer to
which configuration data read from a USB flash drive
will be applied.
4 Press [READ] (F6) to open the File (TX EQ) screen.
• The File (TQ EQ) screen appears.
• Pressing [CANCEL] (F7) returns you to the TX Equalizer
screen without selecting the configuration data.
• Pressing [DELETE] (F6), a message prompting you to
ensure the deletion of the file appears. Pressing [OK] (F4)
deletes the file.
• Pressing [NAME] (F5) enables you to rename the
configuration data. {page 12-4}