Kenwood TS-990S, Инструкция по эксплуатации

Страница: 251 / 290

USEFUL FUNCTIONS 16
16-19
Index Contents
CONFIGURING THE I/O SIGNALS FOR THE
OPTICAL DIGITAL CONNECTOR
If you connect an external device, such as a PC, to the
OPTICAL IN and OPTICAL OUT connectors on the rear
panel, you can configure the level of signals modulated or
reproduced in the external device or the level of signals
processed in an equalizer.
From the OPTICAL OUT connector, the main band
received audio is available on the left channel, and the sub
band received audio is available on the right channel.
CONFIGURING THE INPUT AUDIO LEVEL
If you connect an external device to the OPTICAL IN
terminal on the rear panel, you can configure the audio
signal input level.
1 Select Group No. 7, "Rear Connectors", from the Menu
screen.
2 Access Menu 07, "Optical: Audio Input Level".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate MULTI/CH control to
select the input level from the available range between
"0" and "100".
The default is "50".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ You can configure the desired input audio according to the
transmission method. {page 9-1}
◆ If you assign Data Send to a PF key, you can transmit the signal
from the configured modulation line. {page 9-1}
◆ The OPTICAL IN connector conforms to the sampling frequency
of 44.1 kHz and 48 kHz, and to the number of bits of 16 bits and 24
bits.
CONFIGURING THE OUTPUT AUDIO LEVEL
If you connect an external device to the OPTICAL OUT
terminal on the rear panel, you can configure the audio
signal output level.
1 Select Group No. 7, "Rear Connectors", from the Menu
screen.
2 Access Menu 12, "Optical: Audio Output Level (Main
Band)" or Menu 13, "Optical: Audio Output Level (Sub
Band)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) and [+] (F5), or rotate the MULTI/CH
control to select the audio signal output level for the
main band from the available range between "0" and
"100".
The default is "100".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ The OPTICAL OUT connector conforms to the sampling frequency
of 48 kHz, and to the number of bits of 24 bits.