Kenwood KRF-V6070D, Инструкция по эксплуатации

Страница: 22 / 200

22
EN
ENGLISH
Using the RDS Disp.
(Display)
key
4
¢
+ +
+
RDS Disp.
Pressing the RDS Disp. key changes the contents of the display.
Each press switches the display mode as follows:
1
PS (Program Service name) display
2
RT (Radio Text) display
3
Frequency display
1
PS (Program Service name) display:
The station name is displayed automatically when an RDS broadcast
is received.
If no PS data was sent, “
NO PS ” is displayed.
2
RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the display.
“
NO RT ” or “ RT---- ” is displayed if the current RDS station does not
provide RT data.
3
Frequency display:
Displays the frequency of the current station.
Listening to radio broadcasts
2
Use the P.Call
@¥#
keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.Call
#
does the following:
Pressing the P.Call
@
does the following:
Holding down the P.Call
#
or
@
key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
Proceed to step
3
within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
Blinks for 5 seconds Lights for 5 seconds
2
Press the MEMORY key while receiving the station.
3
Use the MULTI CONTROL knob or Multi
%
/
fi
keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps
1
,
2
,
3
, and
4
to store as many stations as
necessary.
• If you store a station at a previously used preset, the previous station
will be replaced by the new one.
Receiving preset stations
4
¢
+ +
+
TUNER
Numeric keys
1
Press the TUNER key to select tuner as the source.
2
Enter the number of the preset station you want to receive (up
to “40”).
Press the numeric keys in the following order:
For “15”, press ................................
0
,
5
For “20”, press ................................
0
,
0
,
)
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
Receiving preset stations in order
(P.Call)
4
¢
+ +
+
TUNER
P.Call
@
/
#
1
Press the TUNER key to select tuner as the source.
*5332/16-23/1EN 1/21/03, 10:06 PM 22