Kentrox RMM-1400, Руководство по настройке

Страница: 19 / 246

Remote RMM-1400 Version 2.0x Configuration Guide
Remote RMM-1400 Product Overview: RMB Peripheral Units
1-5
RMB Peripheral Units
RMB-1 Peripheral Unit
The RMB-1 peripheral unit (shown in Figure 1-3 ) can be connected to and powered
from one of Remote RMM-1400’s PoE-capable Ethernet ports. RMB-1 adds the
following connectors and counts:
 64 digital bistate inputs

Four relay outputs
 Four current inputs (4-20 mA)

Four voltage inputs (0-10V, positive only)
 A four-terminal SiteBus

Four sets of auxiliary terminals, which are not electrically connected to other
RMB-1 I/O terminals
 Built-in temperature and humidity sensors
For details on physically connecting to RMB-1 terminals, see the Remote RMM-1400
Installation Guide .
Figure 1-3 RMB-1 Peripheral Unit
RMB-2 Peripheral Unit
The RMB-2 peripheral unit (shown in Figure 1-4 ) offers similar capabilities to RMB-1
in a chassis that is sized to be easily mounted in a standard 19-inch, 21-inch, or 23-
inch rack. RMB-2’s digital bistate inputs support both wet and dry contacts, while
RMB-1’s digital bistate inputs support dry contacts only.