Kentrox RMM-1400, Руководство по настройке

Страница: 187 / 246

Remote RMM-1400 Version 2.0x Configuration Guide
Configuring Jobs: Installing a Script Package
18-5
Installing a Script Package
Important: This procedure assumes that you have obtained a script package from
Kentrox (in this example,
exampleScript-1.0.0.pkg
).
To install a script package:
1. Using an FTP utility, do one of the following:

Transfer
exampleScript-1.0.0.pkg
from the local workstation to the
pkgstage
directory on Remote RMM-1400. Continue to step 2 .
 Transfer
exampleScript-1.0.0.pkg
to the central FTP package server
default directory of
/
, which contains all script packages. Continue to step 3 .
2. At the main CLI prompt, install script package
exampleScript-1.0.0.pkg
to
Remote RMM-1400:
config pkgs install name exampleScript
Continue to step 4 .
3. At the main CLI prompt, install script package
exampleScript-1.0.0.pkg
to
Remote RMM-1400 from the central FTP package server:
config pkgs install name exampleScript-1.0.0 fromserver
Important: To install a script package from a central FTP package server, you
need to configure a static route. For more information, refer to
Configuring Static Routes on page 7-1 .
4. (optional) Verify that the script package has been installed properly:
show pkgs summary
The command response appears similar to the following:
In this scenario, you will:
 Use an FTP utility to transfer a script package to the Remote RMM-1400
staging area or to the configured central FTP package server
Tip: For more information on how to configure a central FTP package server,
refer to procedure
Configuring Access to a Central FTP Package Server
on page 18-4 .

Install the script package
(Dub)>show pkgs summary
Package Version
examplescript 1.0.0
(Dub)>