ENGLISH
35
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1.
Press
.
2.
Once the oven has cooled down for approximately 1 HOUR and
the "
DOOR LOCKED
" icon is no longer displayed,the oven door
can then be opened (See Fig. 8).
Fig.7
When the Self-Clean cycle is done:
1.
The time of day, "
HOT
", "
DOOR LOCKED
" and "
CLEAN
" icon
will remain in the display (See Fig. 7).
2.
Once the oven has cooled down for approximately 1 HOUR, and
the "
DOOR LOCKED
" icon is no longer displayed, the oven
door can then be opened.
IMPORTANT NOTES
when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON (if equipped).
2. A Self-Clean cycle cannot be started if
Oven Lockout
feature is active.
3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see the instructions to set the control for the
24 hour
time of day
display mode.
INSTRUCTIONS
PRESS
DISPLAY
Self-Cleaning
•
Setting Flex Clean or Delay Flex Clean
Fig.8
