Kemper EVOLUTION LINE, Руководство по эксплуатации

Страница: 63 / 204

Description of the line
Emil Kemper GmbH EVOLUTION LINE roll machine
55
6 Description of the line
The structure and functioning of the assemblies and line modules are described below.
Note!
Details of the head machine are given in the separate operating manual.
6.1 Basic module
The basic module consists of the intermediate proofer and the drive frame. The purpose
of the drive frame is to protect and support the electric drive. The intermediate proofer
contains the proofing frame transport and the switchbox.
The proofing frame transport consists of the cup chains, the cups and the deflection and
drive axles. The cups are lined differently depending on the hygiene requirements for the
respective pieces of dough.
The intermediate proofer is used to hold and for intermediate proofing of the pieces of
dough. They are transported through the intermediate proofer via the proofing frame. The
pieces of dough remain there for a bespoke period of time. A steam generator system
guarantees a moist climate in the intermediate proofer. The intermediate proofer contains
standard UV sterilization for proofing frame transport via TUV lamps. The moist lining of
the cups is dried via infra-red radiators. A heater with fan warms the air inside the
intermediate proofer. Relevant positions inside the proofer are illuminated using several
lamps.
The basic module can be switched to green dough. The pieces of dough are then
discharged from the head machine into a lower infeed at the basic module. The pieces of
dough are subsequently transported through the entire system and output.