Kemper EVOLUTION LINE, Руководство по эксплуатации

Страница: 176 / 204

Cleaning and maintenance
168
EVOLUTION LINE roll machine Emil Kemper GmbH
8.3.10.2 Tensioning the conveyor belt

Carry out the preparations (see section "8.3.1 Preparations").
Check the belt tension.
Turn the hexagon nut (1) in the direction of the
arrow (2) to tension the belt.
Tension the belt equally on both sides.
8.3.11 Flour duster with flour break-up shaft
Configuration of the line module flour duster with flour break-up shaft in the line is
displayed in section "5 Overview of the line".
Note!
The schematic diagrams below describe the flour duster with break-up
shaft. The version that is delivered may differ from the version shown here.
8.3.11.1 Cleaning the flour container

Carry out the preparations (see section "8.3.1 Preparations").
Pull the adjusting handle (2) in the direction of
the arrow (3) to extract the flour duster (1) from
the holder.
Empty the flour duster (1).
Use a brush to clean any residual flour from the
flour duster (1).