Kemper 345plus, Руководство оператора

Страница: 17 / 126

Safety Measures
ZX,WEIGHT676 -19-20JAN95-1/1
DX,PAINT -19-24JUL02-1/1
KM00321,000016E -19-14MAY09-1/1
Ballasting for Safe Ground Contact
Operating, steering and braking performance of forage
harvester can be considerably affected by attachments
which alter the center of gravity of the machine. To
maintain safe ground contact, ballast the harvester at the
rear end as necessary. Observe the maximum permissible
axle loads and total weights.
ZX007220
—UN—21MAR95
Remove Paint Before Welding or Heating
Avoid potentially toxic fumes and dust.
Hazardous fumes can be generated when paint is heated
by welding, soldering, or using a torch.
Remove paint before heating:
•
Remove paint a minimum of 100 mm (4 in.) from area
to be affected by heating. If paint cannot be removed,
wear an approved respirator before heating or welding.
•
If you sand or grind paint, avoid breathing the dust.
Wear an approved respirator.
•
If you use solvent or paint stripper, remove stripper with
soap and water before welding. Remove solvent or
paint stripper containers and other flammable material
from area. Allow fumes to disperse at least 15 minutes
before welding or heating.
Do not use a chlorinated solvent in areas where welding
will take place.
TS220
—UN—15APR13
Do all work in an area that is well ventilated to carry toxic
fumes and dust away.
Dispose of paint and solvent properly.
Dispose of Waste Properly
If waste disposal is carried out improperly, this may
damage the environment and ecological systems.
Potentially harmful waste used with KEMPER equipment
include such items as oil, fuel, coolant, brake fluid, filters,
and batteries.
Use leakproof containers when draining fluids. Do not use
food or beverage containers that may mislead someone
into drinking from them.
Do not pour waste onto the ground, down the drain, or
into any water source.
Air-conditioning refrigerants escaping into the air can
damage the Earth's atmosphere. Government regulations
may require a certified air-conditioning service center to
recover and recycle used air-conditioning refrigerants.
TS1
133
—UN—15APR13
05-8 031519
PN=17