Kemper 345plus, Руководство оператора

Страница: 109 / 126

Service
KM00321,0000321 -19-16JUN10-1/2
KM00321,0000321 -19-16JUN10-2/2
Relieve Pressure on the Main Drive Slip
Clutches
CAUTION: Before carrying out adjustment
or service work, always:
- shut off engine
- remove ignition key
- wait until all moving parts have come to a stop.
The two slip clutches (D) on the main drive protect
the rotary harvesting unit from unnecessary loads. It
is therefore important to keep these clutches properly
serviced. The torque setting is 1150 N·m (848.2 lb.-ft.) for
model 390
plus
and 900 N·m (657 lb.-ft.) for all other models.
IMPORTANT: The following steps must be carried out
before operating the rotary harvesting unit for
the first time and prior to every season.
1. Remove screws (B) and cover (A).
KM1000995
—UN—25JUL17
2. Tighten screws (C). This will reduce pressure on the
clutch disks.
3. Rotate the slip clutch by hand.
IMPORTANT: If it is not possible to rotate the
slip clutch by hand, it is necessary to
disassemble and clean it for proper function.
See Removal of Slip Clutch and Disassemble
Slip Clutch in this Section.
4. Loosen screws (C) as far as the threads allow (without
removing them completely).
5. Position cover (A) and install it using screws (B).
IMPORTANT: It is recommended to have the
slip clutches checked once a year by
the KEMPER dealer.
KM1000041
—UN—04APR05
55-2 031519
PN=109