![kelda 95001000 Скачать руководство пользователя страница 23](http://html2.mh-extra.com/html/kelda/95001000/95001000_manual_3951726023.webp)
Fan Protection Mode
If while water is running: the fan and EdgeLight switches off, the Button light starts flashing and the Button becomes
unresponsive, then you have entered Fan Failure Mode. This mode is automatically activated if the fan is running slower
than it should be. This is most likely caused by water ingress, debris/an obstruction in the fan or clogged Dust Filters.
If the Overhead Shower enters Fan Failure Mode, stop using the shower, switch off the water, switch off the power via the
mains and disconnect the power cable. Dismount the Overhead Shower, open the Dust Cap and inspect the fan. You may
have to:
•
Remove the debris and clear all obstructions on or in the fan.
•
Clean the Dust Filters.
•
Drain the water from the fan and leave the fan to dry.
If you find water ingress within the fan, please find the cause and solve it so it does not reoccur. Once complete, remount
the Overhead Shower, reconnect the power cable and turn on the mains power. Turn on the water to test the function of the
fan. If the fan re-enters Fan Failure Mode then:
•
The maintenance process was incomplete and needs to be repeated and conducted more thoroughly.
•
The fan has sustained permanent damage.
If the fan has sustained permanent damage, contact Kelda Customer Service.
Maintenance
Things to Avoid
To keep the BubbleSpa® shower functioning well, please avoid the following:
•
Blocking the nozzles while the BubbleSpa® is running.
•
Hanging items on the BubbleSpa® Overhead Shower or Arm Assemblies.
•
Using the BubbleSpa® shower without a PCB Cover or Dust Cover with Dust Filters.
•
Using the BubbleSpa® Shower without a filter.
Be careful not to allow water into the fan when:
•
Fitting/removing the BubbleSpa® Overhead Shower
•
Spraying any additional water source up at the BubbleSpa® shower
•
Descaling the BubbleSpa® Overhead Shower (page 25).
Warning!
DO NOT SUBMERGE the BubbleSpa® Overhead Shower!
DO NOT SPRAY TOP SURFACE with water! Doing so will
invalidate your warranty.
!
!
23
Содержание 95001000
