kelda 95001000, Руководство пользователя

Страница: 20 / 32

Brightness Bubble Mode
Off Bubbles not visible to the naked eye
Low 1 2 3
Medium 1 2 3
High 1 2 3
Wet Mode
Bubble Effect Light Settings
The LED EdgeLight within the Overhead Shower, which illuminates the bubbles, comes with a selection of light modes to
give you a satisfying bubble experience no matter what your mood is or the time of day. The EdgeLight can be used both
when the shower is on (Wet Mode) or when the shower is off (Dry Mode).
User Guide (BubbleSpa® Overhead Shower)
*Visual representation of how bubbles LOOK at different settings. Pressing the Button does not change the frequency of bubbles or flow rate of the BubbleSpa® shower.
Wet Mode is automatically activated when water flows through the Overhead Shower above 6L/min. The default Bubble Mode
is “1 Low” (see table below). The Overhead Shower will return to this setting in the event of the power being disconnected.
To change the Bubble Mode simply press the illuminated Button in the faceplate.
•
The image above shows the cycle of Bubble Modes.
•
Pressing and holding the Button (for 1-2seconds) will turn the light off regardless of which Bubble Mode is currently
selected.
•
When the water is turned off the Bubble Mode is stored ready for your next shower.
•
‘Off’ is also saved as a setting – if you find the water on but the main LED array isn’t illuminated, it is likely that the
Bubble Mode was set to ‘off’ by the last user. Simply press the Button to cycle to the next Bubble Mode.
20