kelda 95001000, Руководство пользователя

Страница: 11 / 32

Wall Arm Installation
Using the guide provided on page 32, mark out and drill the holes
for the Wall Arm Assembly around the pipe outlet. Ensure that
the hole for the cable and outlet pipe is no bigger than 60mm
diameter.
1
2
3 4
!
Slide the Wall Arm Trim and Trim Sleeve to the wall. Plumbers’
ilicone may be added to the back of the Wall Arm Trim to fix it
in position.
Warning: Read through to the end
prior to commencing installation!
Screw the Water Path Connecter to the outlet pipe. Ensure
that the Water Path Connector is no more than 10mm proud
of the wall tiles and is no more than 8mm inside the wall. Apply
plumber’s silicone grease onto the O-rings on the Water Path
Connector.
Feed the power cable of the Wall Arm Assembly into the wall and
route/fish the power cable through the wall towards the power
supply. Then screw the Wall Arm Assembly to the wall using the
Wall Screws and Wall Plugs provided. Ensure that the O-rings on
the Water Path Connector are not displaced.
O-rings
11