kelda 95001000, Руководство пользователя

Страница: 21 / 32

Warning!
•
To activate Dry Mode press the Button when the shower is off. To deactivate, press and hold for 2 seconds.
•
Press the Button to change the brightness of the light during Dry Mode.
•
The image above shows the Dry Mode cycle when the Button is pressed.
•
Wet Mode can be automatically activated from Dry Mode by turning the water on.
•
A longer press (1-2seconds) will turn the light off regardless of what mode is currently selected.
Diagnostic Function
With the light and water off, press and hold the Button for at least 5 seconds to engage the diagnostic tool. During this
function, the LED EdgeLight and the fan will turn on. To switch off the fan and EdgeLight, simply let go of the Button. Use
this tool to check the function of the fan and EdgeLight.
Flashing Lights!
!
This product uses flashing lights at frequencies of 72Hz, 200Hz and 10,000Hz.
The effect of the lighting modes will vary depending on ambient lighting and the
environment in which it is installed. Anyone diagnosed with a condition which could
be triggered by flashing lights should seek further medical advice.
Bubble Mode
Frequency
1 72Hz
2 200Hz
3 10,000Hz
After Use
After using the shower, users are advised to tilt the Overhead Shower. This drains the water inside of the water chamber.
Brightness
Off
Low
Medium
High
Dry Mode
User Guide (BubbleSpa® Overhead Shower)
21