kelda 95001000, Руководство пользователя

Страница: 15 / 32

Ceiling Arm Installation
Using the Ceiling Arm Bracket as a guide, mark and drill the holes
for the Wall Plugs on the ceiling of the shower cubicle.
1
Insert the Wall Plugs provided into the ceiling and screw the
Ceiling Arm Assembly using the screws provided.
2
Feed the power cable of the Ceiling Arm Assembly into the void.
Attach the Ceiling Arm Assembly to the Ceiling Arm Bracket. The
Ceiling Arm Assembly will snap onto the bracket. The inner tube
will go through the hole with sufficient length to attach the water
supply. The inner tube may be cut to length if it is too long.
3
!
Warning: Read through to the end
prior to commencing installation!
Plywood Sheet
Joists
Ceiling
It is recommended to use a sheet of plywood supported by joists
(as shown above) to fix the pipe mount permanently. Before
installing, make sure the inner pipe of the Ceiling Arm Assembly
is long enough to reach above the plywood sheet– cut the inner
pipe if it is too long. Once the position of the shower has been
determined, drill a hole that is bigger than 17mm but no larger
than 60mm diameter in the ceiling.
15