Keithley DMM6500, Руководство пользователя

Страница: 84 / 123

Section 3: Adjustment DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual
3-20 DMM6500-905-01 Rev. E June 2021
Command parameters for a dc voltage adjustment
When calibrating your DMM6500 for a dc voltage adjustment, use the following command
parameters.
Send each command parameter twice. First, send the parameter using the
setup
command. Second,
send the parameter using the
execute
command.
The example code below uses the first line of code from the table below. Send all command
parameters using this command.
cal.adjust.step.setup("cal_DCV_DIGI_1kV_fs_pos")
cal.adjust.step.execute("cal_DCV_DIGI_1kV_fs_pos")
Command parameters Calibrator
function Calibrator
range Calibrator
value
cal_DCV_DIGI_1kV_fs_pos dc voltage 1100 1000
cal_DCV_DIGI_1kV_fs_neg dc voltage 1100 -1000
cal_DCV_100V_fs_pos dc voltage 220 100
cal_DCV_DIGI_100V_fs_pos dc voltage 220 100
cal_DCV_100V_fs_neg dc voltage 220 -100
cal_DCV_DIGI_100V_fs_neg dc voltage 220 -100
cal_DCV_10V_fs_pos dc voltage 22 10
cal_DCV_DIGI_10V_fs_pos
dc voltage 22 10
cal_DCV_10V_fs_neg dc voltage 22 -10
cal_DCV_DIGI_10V_fs_neg dc voltage 22 -10
cal_DCV_DIGI_1V_fs_pos dc voltage 2.2 1
cal_DCV_DIGI_1V_fs_neg dc voltage 2.2 -1
cal_DCV_DIGI_100mV_fs_pos dc voltage 0.22 0.1
cal_DCV_DIGI_100mV_fs_neg dc voltage 0.22 -0.1
DC current adjustment
The following procedure provides instructions for completing a front-terminal adjustment for dc current
accuracy. The following section provides a command parameter table to complete the adjustment.
For this adjustment, you need a:
•
Fluke 5720 calibrator
•
Fluke 8508A or 8588A Reference DMM