![background image](http://html2.mh-extra.com/html/keithley/dmm6500/dmm6500_calibration-manual_4024212022.webp)
Section 2: Performance verification
Model DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual
2-14
DMM6500-905-01 Rev. A/July 2018
Verify the digitize voltage 100 V range
Description
Input
Lower limit
Upper limit
Verify zero
0
–1E-02
1E+02
Full scale (+)
100
9.9960E+01
1.02
Half scale (+)
50
4.9975E+01
5.0025E+01
Half scale (
–)
–50
–5.0025E+01
–4.9975E+01
Full scale (
–)
–100
–1.02
–9.996E+01
Verify the digitize voltage 1000 V range
Description
Input
Lower limit
Upper limit
Full scale (+)
1000
9.9960E+02
1.03
Half scale (+)
500
4.9975E+02
5.0025E+02
Half scale (
–)
–500
–5.0025E+02
–4.9975E+02
Full scale (
–)
–1000
–1.03
–9.996E+02
Frequency verification
To verify frequency accuracy, you will:
•
Apply accurate frequencies from the function generator to the terminals on the front panel of the
DMM6500.
•
Verify that the displayed readings are within specified limits.
Use the values in the table following the steps below to verify the performance of the DMM6500.
Actual values depend on the published specifications (see
Example reading limit calculation
1. Connect the Keithley Instruments Model 3390 function generator to the DMM6500 INPUT HI and
LO terminals as shown in the following figure.
Figure 6: Connections for frequency verification and adjustment