![background image](http://html2.mh-extra.com/html/keithley/dmm6500/dmm6500_calibration-manual_4024212045.webp)
Model DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual
Section 2: Performance verification
DMM6500-905-01 Rev. A/July 2018
2-37
Verify DC voltage zero values
Range
Lower limit
Upper limit
1000
–6.00E-03
6.00E-03
100
–6.00E-04
6.00E-04
10
–5.00E-05
5.00E-05
1
–6.00E-06
6.00E-06
100 mV
–3.50E-06
3.50E-06
Rear-panel verification
The following topics describe verification procedures that are done with connections attached to the
terminals on the DMM6500 rear panel.
DC current 10 A range verification
To verify 10 A range:
1. Set the TERMINALS switch to
REAR
.
2. Press the
FUNCTION
key and select
DC Current
.
3. Press the
HOME
key.
4. Set the range to
10A
.
5. Connect the DMM6500, reference DMM, calibrator, and amplifier as shown in the following figure.
Ensure cabling is designed to conduct 10 A without significant voltage drop. In general,
cables for the 10 A range steps should be made of heavy gauge wire and should be as short
as practical.