![background image](http://html2.mh-extra.com/html/keithley/dmm6500/dmm6500_calibration-manual_4024212036.webp)
Section 2: Performance verification
Model DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual
2-28
DMM6500-905-01 Rev. A/July 2018
Verify DC current 1 A range
Description
Calibrator
setpoint (A)
Lower limit
Upper limit
UUT zero
STANDBY
REL
n/a
Full scale (+)
1
9.99550E-01
1.00
Half scale (+)
0.5
4.99750E-01
5.002500E-01
Half scale (
–)
–0.5
–5.00250E-01
–4.99750E-01
Full scale (
–)
–1
–1.00
–9.99550E-01
Verify DC current 3 A range
Description
Calibrator
setpoint (A)*
Lower limit
Upper limit
UUT zero
STANDBY
REL
n/a
⅔ scale (+)
2
1.00
2.00
Half scale (+)
1.5
1.00
1.00
Half scale (
–)
–1.5
–1.00
–1.00
⅔ scale (–)
–2
–2.00
–1.00
* The 3 A range full-scale test points are limited to 2 A in this table because of the accuracy
limitations of Fluke Models 57xxA and 5725A series calibrators at currents above 2.2 A.
0
Verify DC current 10 A range
DC current 10 A range verification
(on page 2-37) under
(on page 2-37).
Digitize current verification
The following topics describe how to verify digitized DC current on the DMM6500.
Digitize DC current verification 10 µA to 3 A ranges
To verify digitize DC current accuracy:
1. Connect the DMM6500 and calibrator as shown in the following figure.
Figure 14: Connections for digitize DC current 10 µA to 3 A range verification