![background image](http://html1.mh-extra.com/html/keithley/das-1800hc-series/das-1800hc-series_user-manual_3961491059.webp)
Attaching an SSH-8
4-7
Attaching an SSH-8
The SSH-8 is a simultaneous-sample-and-hold accessory. This accessory
can serve as a front-end analog interface for DAS-1800HC Series boards
when connected through an STA-1800HC or a CONN-1800HC. Note that
the attached SSH-8 accessories must be set as slaves. Attach the SSH-8
accessories to the STA-1800HC or CONN-1800HC as shown in Figure
4-7. Refer to the
SSH-8 User’s Guide
for more information.
Figure 4-7. Cabling and Connections for Attaching SSH-8 Accessories to a
DAS-1800HC Series Board
STA-1800HC Accessory
SSH-8
Accessory
C-1800
Cable
To DAS-1800HC Series board
Note: cabling between an SSH-8
and a CONN-1800HC is exactly as
shown in this diagram for the
STA-1800HC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com