![background image](http://html1.mh-extra.com/html/keithley/das-1800hc-series/das-1800hc-series_user-manual_3961491058.webp)
4-6
Cabling and Wiring
Attaching a CONN-1800HC
The CONN-1800HC connector panel is an interface for cabling SSH-8s
and MB modules to DAS-1800HC Series boards. You can also use the
CONN-1800HC for custom hookups. This accessory is essentially an
STA-1800HC without screw terminals or CJC circuit. Components are as
follows:
●
A 100-pin female connector for cabling to the main I/O connector of
a DAS-1800HC Series board.
●
Four 37-pin male connectors for cabling to MB01 backplanes, SSH
accessories, or custom hookups.
Pin assignments for the main I/O connector of a CONN-1800HC are the
same as those for the STA-1800HC, as shown in Figure 4-2 on page 4-3.
Use a CAB-1800 Series cable (a list of these cables appears on page 4-4)
to connect a CONN-1800HC to a DAS-1800HC Series board, as shown in
Figure 4-6.
Figure 4-6. Cabling and Connections for Attaching a CONN-1800HC
to a DAS-1800HC Series Board
DAS-1800HC Series Board
CONN-1800HC
CAB-1800 Ser
ies Cab
le
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com