1-4
Overview
●
CONN-1800HC
is a connector panel. This accessory connects to the
DAS-1800HC Series main I/O connector through a CAB-1800 Series
cable to provide a 4-connector interface for SSH-8s, MB modules, or
custom hookups.
●
STP-100
is a screw terminal panel. This accessory provides
general-purpose screw-terminal connections in a compact form
factor.
●
RMT-04
is a
rack mount enclosure for the STA-1800HC.
●
SSH-8
is
an 8-channel simultaneous-sample-and-hold accessory for
the DAS-1800HC Series boards.
●
MB Series modules and MB01 backplanes
are plug-in, isolated,
signal-conditioning modules and the backplanes that hold them.
●
C-16MB1
is a cable for connecting an STA-1800HC to an MB01
signal-conditioning backplane.
●
CAB-1800 Series
are cables for connecting a DAS-1800HC Series
board to an STA-1800HC, STP-100, or CONN-1800HC. This series
consists of the following cable models:
–
CAB-1800
is an 18-inch ribbon cable.
–
CAB-1801
is a 36-inch ribbon cable.
–
CAB-1800/S
is an 18-inch shielded, ribbon cable.
–
CAB-1801/S
is a 36-inch shielded, ribbon cable.
●
C-1800
is an 18-inch ribbon cable with two 37-pin female type D
connectors for connecting an STA-1800HC to an SSH-8.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com