manualshive.com logo in svg

Keithley 2302, Инструкция по эксплуатации, Страница: 328 / 348

Поделиться
Скачать
Keithley 2302 Скачать руководство пользователя страница 328

F-2

Model 2302 Specifics

General information

NOTE

Since the Model 2302 and 2302-PJ are single channel battery simulators, functions 
contained in this manual related to the second channel (i.e., the charger channel) are 
not available for the Model 2302 and 2302-PJ. With this in mind, for the Model 2302 
and 2302-PJ, only battery channel features contained in this manual apply.

Specifications 

Full power supply specifications can be found in Appendix A of this manual.

Power supply overview 

The Model 2302 and 2302-PJ power supplies (single channel battery simulator — 

 

Figure F-1

) simulate a battery. The features match the battery channel features (Channel 1) 

documented in this manual (2306-901-01).

Operational differences

Front panel operation

Since the Model 2302 and 2302-PJ are single channel units, disregard any statements in the 

manual such as “Toggle active channel using the 

s

 or 

s

 keys.” Also, the #1 or #2 indicating the 

active channel is not displayed—the active channel is always the battery channel.

SCPI operation

If a channel 2 bus command is issued, an “Undefined header” error (-113) will result.

*IDN? will reflect the Model 2302 and 2302-PJ instead of the Model 2306, 2306-VS, or 

2306-PJ.

When using the DISP:CHAN command, only send a “1” as a parameter. Other values will 

result in a parameter data out of range error (-222).

The BOTHOUTON and BOTHOUTOFF along with other BOTH commands do not work 

with the Model 2302 or 2302-PJ.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 

TestEquipmentDepot.com 

Содержание 2302





























































































































































































































































































































































Отзывы:

Нет отзывов