Keithley 2002, Руководство по калибровке

Страница: 56 / 114

3
Calibration Command Reference
3-1
3.1 Introduction
This section contains detailed information on the various
Model 2002 IEEE-488 bus calibration commands. Section 2
of this manual covers detailed calibration procedures, and
Appendix B lists calibration programs. For information on
additional commands to control other instrument functions,
refer to the Model 2002 User's Manual.
Information in this section includes:
3.2 Command summary:
Summarizes all commands
necessary to perform comprehensive, AC, and low-
level calibration.
3.3 CALibration:PROTected Subsystem:
Gives detailed
explanations of the various commands used for both
comprehensive and low-level calibration.
3.4 CALibration:UNPRotected Subsystem: Discusses
the :ACC command, which is used to perform AC user
calibration over the bus.
3.5 Bus error reporting: Summarizes bus calibration
errors, and discusses how to obtain error information.
3.6 Detecting calibration step completion: Covers how
to determine when each calibration step is completed
by using the *OPC and *OPC? commands.
3.2 Commands
3.2.1 Command summary
Table 3-1 summarizes Model 2002 calibration commands
along with the paragraph number where a detailed descrip-
tion of each command is located.