Keith McMillen Instruments QuNexus RED, Руководство пользователя

Страница: 35 / 49

Q
u
N
exus
e
diTOr
35
Q
u
N
exus
2.0
4.9 s
eQueNCer
T
ab
The Sequencer Tab allows you to configure the various settings of the three track arpeggiator and step sequencer.
Each of the three tracks receives information from the keyboard and/or sequencer, and routes it to the assigned
track destinations�
4.9.1 s
eQueNCer
s
eTTiNGs
The Sequencer Settings tab sets global parameters for the QuNexus Sequencer�
Tempo - Set the tempo for the Sequencer (range:5-255 bpm)
Clock Source -
selects the clock that the QuNexus sequencer is synchronized to. Auto will default to the
internal clock, but will automatically synchronize to MIDI clock and transport from the USB or the Expander
port. Internal will ignore all clocks but the internal clock. Selecting USB Port 1 or Expander will only sync to
those sources.
CV In 1&2 behaves differently than the other clock modes. This mode disables the internal QuNexus
sequencer clock, and instead clocks CV in 1 to Track 1 and CV in 2 to Track 2, with each incoming clock pulse
advancing the track by one step. Track 3 is controlled by a mathematical AND, OR, or XOR (Exclusive Or) of
the two CV inputs.
Clock Dest sends MIDI clock to the USB1 and/or Expander ports. You can also send clock out of the Gate or
CV outputs, see the CV tab section 123456789 for more details.
CV3 In - see above “CV In 1&2”.
CV PPQN - Select the number of clock pulses per quarter note to send out the Gate or CV outputs when clock
is routed to them.
4.9.2 T
raNspOse
The Transpose value represents the number of semitones to transpose the keyboard up or down� You can
transpose up or down by 12 semitones�