Keith McMillen Instruments QuNexus RED, Руководство пользователя

Страница: 22 / 49

s
eQueNCer
/a
rpeGGiaTOr
22
Q
u
N
exus
2.0
To enable hold mode, long-press the “Hold” key until it lights up� You can disable hold by long-pressing
the hold key again�
To switch between the Standard and Toggle hold modes, hold the shift key and press/release the ARP
key, which will stay solid to indicate that standard mod is enabled, or blink to indicate that toggle mode
is enabled�
To clear a held pattern, press/release the HOLD button�
3.5.2 a
rpeGGiaTOr
p
laybaCk
p
aTTerNs
To change the arpeggiator playback pattern, hold shift and press/release “Pattern”, then using the
numeric keys, select one of the ten arpeggiator patterns�
The playback patterns are:
1� UP
2� DOWN
3� UP/DOWN (exclusive)
4� UP/DOWN ((inclusive)
5� PLAY ORDER (forward)
6� PLAY ORDER (reverse)
7� PLAY ORDER (pendulum, exclusive)
8� PLAY ORDER (pendulum, inclusive)
9� RANDOM
10� BROWNIAN MOTION (drunk)
3.6 s
eQueNCer
3.6.1 e
NTeriNG
s
Teps
To turn on a track’s step sequencer, hold shift and press “Sequence”� While still holding shift, press
“Rec” and then let go of shift� You are now in Step Input record mode� Each note that you play on the
keyboard will be entered sequentially into the step pattern�
3.6.2 e
NTeriNG
r
esTs
, T
ies
, s
lurs
,
aNd
d
eleTiNG
s
Teps
To enter a Rest, hold Shift and press/release the “9/Rest” key. The key will briefly flash indicating that a
rest has been entered�
To undo the last note entered, hold shift and press the “9/Reset” key for 3+ seconds�
To enter a Tie, hold shift and press/release the “10/Tie” key� This duplicates the last note that you played
and ties the two notes together. The key will briefly flash indicating that a tied note has been entered.