Keith McMillen Instruments QuNexus RED, Руководство пользователя

Страница: 36 / 49

Q
u
N
exus
e
diTOr
36
Q
u
N
exus
2.0
4.9.3 T
raCk
s
eTTiNGs
QuNexus has three “Tracks” that perform in parallel� By selecting these tracks with the shift menu, you can
quickly control different MIDI and CV devices on the fly. The tracks can also be programmed to play different
sequences or arpeggios, of varying lengths, with different sounds on different MIDI Channels and CV outputs�
Mode - Use the drop down menu to select if the Track will be a Sequencer of Arpeggiator
Mono - Currently all of the sequencer and arpeggiator functions are monophonic�
Division - Sets the clock division for the Track� The division will be a fraction of the pulse from the Clock Source,
and ranges from whole notes to 32nd notes� You can also choose triplet or dotted (1�5x) divisions (except for
32nd notes, which cannot be dotted)�
Gate Off - The length of time that a note is held before it is released, as a percentage�
Play Pattern - Sets the playback pattern of the sequence or arpeggiator (see chapter 4 for a description of the
different play patterns)�
Sequence - Select a stored Step Sequencer pattern to play back (patterns 1-8), or load an empty pattern
(default)� Does not apply to Arpeggiator�
Length - Sets the Length (number of steps) of the playback pattern, from 1-32�
PChg - When the preset is loaded, send the selected Program Change (0-127) to the destination MIDI ports
and channels�
Destination - Select which ports the MIDI data is sent out on (USB and/or Expander), and select the Track’s
MIDI Channel (MPE is only selectable for Track 1)�
4.10 Cv l
ayer
Here you can choose how the QuNexus keys send and receive CV (Control Voltage) QuNexus has 4 possible CV
outputs and 2 possible CV inputs (see the CV chapter for the hardware specs)�