Keith McMillen Instruments QuNexus RED, Руководство пользователя

Страница: 44 / 49

a
ppeNdiCes
44
Q
u
N
exus
2.0
• Keyboard/Sequencer Track 2
• MIDI Channel 10 routed to the USB and MIDI Expander Ports
• Assigned to CV2 (gate) out
• Keyboard/Sequencer Track 3
• MIDI Channel 10 routed to the USB and MIDI Expander Ports
• Assigned to CV3 (gate) out
• Velocity is On for notes in Keyboard Layer and Off for notes in Controller Layer.
• Local LED Control is off. Remote LED messages are received through Channel 9.
• Notes and CC#s in Controller Layer output on Channel 9.
a
ppeNdix
b: k
ey
s
eNsiTiviTy
a
dJusTMeNTs
G
lObal
s
eNsiTiviTy
a
dJusTMeNT
There are Global Sensitivity controls in the “Keyboard Sensitivities” section of the Keyboard Layer� Here you can
adjust the Sensitivity, On and Off Thresholds, and the Tilt Sensitivity� These are global for the entire keyboard
but can be set differently for each preset�
Sensitivity controls how easy it is to get higher value ranges when controlling pressure and velocity� The higher
the sensitivity, the easier it will be to reach the upper range of values. The lower the sensitivity, the more difficult
or impossible it will be to get higher value ranges�
On Thresh controls the pressure value at which a Note On will register� For example, if set to 10, the Slider
pressure has to reach a value of 10 before a Note On is sent�
Off Thresh controls the pressure value at which a note off will register� For example, if set to 5, the Slider
pressure would have to be 5 or lower for a note off to register� The Off Threshold cannot be set higher than the
On Threshold�
Tilt controls how easy it is to activate the Tilt source� By default, Tilt engages instantly to allow quick modulation
of parameters. Lower this value, and tilt will require an intentional pressure shift/tilt of your finger to engage.
This makes it easier to activate Tilt only when you want to� The higher the value of Tilt Speed, the easier it is to
activate Tilt�
Pressure
sets the sensitivity multiplier for per-key Pressure (.5-2.0, default 1.0).
p
er
-k
ey
s
eNsiTiviTy
a
dJusTMeNT
You can adjust the sensitivity of each key individually� To do this, select “Per Key Sensitivities” from the
“Hardware” drop down menu�
Use the sliders to adjust the sensor gain of each key� Move the slider up to make the key more sensitive, or
down to decrease sensitivity� Adjustments made here are added to the sensitivity setting in the Keyboard Layer�
Adjustments can be made in both places and neither will override the other� Pressing the “Reset All Keys”
button will return all keys to their center positions�
The settings of the Per Key Sensitivities window are not saved per preset, they are applied globally for all
presets� Adjustments to the key sensitivity are sent down to the QuNexus as you make changes in real time�