Keith McMillen Instruments QuNexus RED, Руководство пользователя

Страница: 30 / 49

Q
u
N
exus
e
diTOr
30
Q
u
N
exus
2.0
The Delete and Save As buttons under the Preset Library allow you to add or remove presets� Copy/Add a
Preset by first double clicking on the preset you wish to copy and then clicking the Save As button. You can
assign it a name and it will be added to the bottom of the Library�
To send a Preset from the Library to the QuNexus, select the Preset in the Library and click one of the four
“Send Preset to…” buttons� The Library will display a letter (A, B, C, D) next to the preset to show which Presets
are in which slots� If the Preset has any unsaved changes you must save them before sending them to the
QuNexus�
Import and Export Presets using the commands in the File Menu� “Import Preset” lets you select a previously
exported preset and load it to a new slot. “Export Preset” will save a file containing the currently selected
preset to a location of your choice on your hard drive for safekeeping or sharing�
4.7 M
eNu
b
ar
The QuNexus Editor Menu Bar contains several useful features�
4.7.1 f
ile
M
eNu
The File menu duplicates the New, Save, Delete, and Revert Preset functions from the Preset Library box,
assigning them shortcuts for added convenience�
You can import and export Presets from this menu, and you can Import Factory Presets� Importing a
Factory Preset will create a new slot with the original Factory Preset�
4.7.2 e
diT
M
eNu
The Edit menu contains several copy/paste functions�
The “Copy Controller Sensor” and “Paste Controller Sensor” menu items allow you to copy and paste keys
in the Controller Layer�
You can also use the items within the Copy/Paste Layer submenu to copy and paste entire layers to other
Presets� Select a Preset and use the menu options to copy its Controller Layer, Keyboard Layer, or CV
Layer� Navigate to a different Preset and paste the corresponding Layer�
4.7.3 h
ardWare
M
eNu
The Hardware menu is where you will find items that affect the QuNexus firmware, LEDs and sensor
adjustment�
4.7.3.1u
pdaTe
f
irMWare
“Update Firmware” forces a firmware update. If the connected QuNexus’ firmware is already up to
date, it will just reload the same firmware. If the QuNexus firmware is not up to date, the Editor will
automatically prompt you for an update when you plug in the QuNexus�
4.7.3.2 l
Oad
p
reseT
“Load Preset” loads a preset (Slot A, B, C or D) on your QuNexus�