Cannular Semi-Auto Instruction Manual
Page
18
of
23
www.KegLand.com.au
Last Updated 24/04/2020 5:59 PM
Actual Overlap
This process will determine that you have sufficient overlap. Ideally if you have a set of
calipers, it is best to measure how much overlap you have. Having an overlap is absolutely
critical to getting a sufficient seal. This step will require good eyesight and/or a steady hand,
so if your eyesight is not exceptional, it would be worth getting some assistance from
someone else.
STEP 1
Using the Cannular can seamer, prepare two test cans. Seam the first can using just the first
operation seam. With the second can, use both the first and second operation to finish the
seam. You should have two individual cans that look like this below:
LEFT
: First operation only (we will refer to this as Can A)
RIGHT
: First and second operation completed (we will refer to this as Can B)
