Cannular Semi-Auto Instruction Manual
Page
21
of
23
www.KegLand.com.au
Last Updated 24/04/2020 5:59 PM
STEP 5
Similar to step 4 examine the overlap.
This can be more difficult to see as the
seam has already been finished. It can
make it easier to see this overlap if you
gently pry open the can seam slightly
with a sharp object but without making
significant dimensional changes. This
might make it slightly easier to see the
start and finish of the cover hook and
body hook.
This measurement should be at least 0.4mm however if this measurement is over 1mm it is
ideal.
2
nd
Op Seam Thickness
CAN A
