Cannular Semi-Auto Instruction Manual
Page
9
of
23
www.KegLand.com.au
Last Updated 24/04/2020 5:59 PM
If you get the buckle happening on the second operation then please check your can is being
raised straight up and completely concentric with the chuck.
Small adjustments to the turn table position
To make small adjustments to the turn table position.
1.
Undo (turn counter-clockwise) the coupling nut on the turn table using an allen key.
2.
Use two fingers to move the turn table slightly in the desired direction while re-
tightening (turn clockwise) the coupling nut on the base of the turn table.
3.
Check the can now lifts concentrically
Large adjustments to the turn table position
If larger adjustments are required to the position of the turn table.
1.
Unplug the power from the machine and tip it on its back
2.
Use the 5mm allen key to undo the three bolts that secure the turn table to the base
of the machine
