![Kees van der Westen Mirage Slim Jim Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/kees-van-der-westen/mirage-slim-jim/mirage-slim-jim_installation-manual_3883248003.webp)
GENERAL
Slim Jim Installation manual
page 2
Designation
This manual applies to the 2-group and 3-group Slim Jim Mirage espresso machines with touchpad or
Bastone operation manufactured by Kees van der Westen Espressonistic Works B.V. A separate
rotational pump with electric motor is part of the appliance.
Safe operation
•
The espresso machine has to be placed in a horizontal position on a sturdy and flat surface.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
•
The new hose-sets supplied with the appliance are to be used. Old hose-sets should not be
reused.
•
Intended use of the appliance is restricted to well-trained personnel only.
•
The appliance must be installed in locations where it can be overseen by trained personnel.
•
The appliance may not be left unattended when there is the possibility that children and/or
vulnerable people can reach the machine.
•
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
•
The mains electricity the appliance is connected to must include a residual-current-circuit-breaker
of 30 mA.
•
The appliance may not be cleaned with the aid of a water jet.
•
The appliance is not suited for outdoor use.
•
Ambient temperature for correct operation of the appliance is 10-30°C (50-86°F).
•
If ambient temperature falls below 5°C (41°F), keep the machine at ECO or ON to prevent freezing
of water inside the machine.
Note that the external rotational pump should be kept above freezing point of water as well.
Whenever the machine and/or pump have suffered freezing conditions, ask a technician to start-
up the appliance again.
•
It is advised to install a leak prevention system as the appliances is directly connected to the water
mains. An unattended leak can cause serious damage to the premises.