HD Intelligent Speed Dome Camera
User Manual
82
Note: During direction calibration, try to keep the device as horizontal as possible.
Zero Correction
When the PTZ position fails to synchronize with the positioning or user wants it to
return to the zero position, zero correction can be performed. After zero correction,
camera will return to the mechanical zero position automatically. Click “Pan/Tilt Zero
Correction” to perform.
Positioning
Present Coordinates: show the coordinates of current PTZ position.
Horizontal Coordinate: fill the
target horizontal coordinate and click “Horizontal
Positioning”, then the PTZ will rotate to the target pan position.
Vertical Coordinate:
fill the target vertical coordinate and click “Vertical
Positioning”, then the PTZ will rotate to the target tilt position.
*Azimuth Positioning: it means the PTZ camera faces to the due north. Rotate
the camera to a specific position and click
“Azimuth Positioning”. Save this
position and set it as the due north direction. After azimuth positioning is set, go
to
Settings > Camera > OSD
and select
“PTZ”, it will show the live direction of
the camera.
