HD Intelligent Speed Dome Camera
User Manual
17
c) C
lick “Save” to finish preset setting; click “Load” to validate current preset and
perform intelligent analysis.
Click “Delete” to delete current preset; click “Clear”
to clear all presets.
Note: It supports maximum 8 preset positions.
Attention:
After click “Load”, current preset takes effect and perform intelligent
analysis and meanwhile its status is locked. If you adjust the PTZ or
camera field of view on other interfaces, the camera will restore to locking
status automatically in 5 minutes.
2.6.2
Calibration
Go to
Intelligent > Settings > Calibration
to configure calibration and prior area.
Note:
Calibration can be done only when the camera is installed. If the camera height,
angle of pitch or focal length changes, user needs to calibrate again.
Human recognition camera does not support
“Near Far Box Flag” calibration.
Picture 2-17 Calibration
1) Select a preset number from the dropdown list.
2) Calibrate. When the camera is used to capture vehicle, calibrate by referring to the
vehicle plate.
a) S
elect “Enable Near Far Box Flag”. When the vehicle plate is in the center of the
image, click “Pause”. Adjust the size and position of the “Far” box to make it the
same width as that of the plate;
Note: Click to select the box and drag the 4 yellow points at the corners to
adjust the length and width of it; long-press on the box to select it and
drag it to proper positions.
