HD Intelligent Speed Dome Camera
User Manual
109
7.3 Alarm Output
Before starting configuration, make sure that the camera has connected to alarm output devices
such as alarm bell. The camera will transfer the received alarm signal to the alarm output device to
trigger an alarm. Configuration steps are as follows:
1) Go to
Settings > Event > Alarm Output;
Picture 7-24 Alarm output
2) Please select an option from the dropdown list according to actual request. Options vary from
“Without Delay” to “10 min”, and the default is 5s. After the “Delay Time”, the alarm will be
cancelled automatically;
Note: The default duration of alarm output is 5s, and the delay time means the prolonged
period of time after the default 5s.
3)
Click “
Save
” to validate setting.
7.4 Abnormality Linkage
Configure the alarm linkage method for abnormal events, and the camera will judge if it is
necessary to trigger an alarm. Configuration steps are as follows:
1) Go to
Settings > Event > Abnormality Linkage
;
Picture 7-25 Abnormality Linkage
2) Select "Enable";
3) Select an option from the dropdown list of Abnormality Type;
Note:
