Kaysun KSWP-70 DR8, Инструкция по установке и эксплуатации

Страница: 24 / 32

21
11 TROUBLESHOOTING
Error code
NO. Display Malfunction or Protection
1 bA Ambient temp. sensor (T4) out of operation range
2 C7 High temperature protection of inverter module
3 E0 Water flow malfunction(after 3 times E8)
4 E2 Communication malfunction between controller and main control board
5 E3 Total outlet water temp.sensor(T1) malfunction
6 E5 Air side heat exchanger temperature sensor (T3)malfunction
7 E6 The ambient temperature sensor (T4)malfunction
8 E8 Water flow malfunction
9 E9 Suction temperature sensor(Th) malfunction
10 EA Discharge temperature sensor(Tp) malfunction
11 Ed Inlet water temp.sensor (Tw_in) malfunction
12 EE EEprom malfunction
13 F1 DC bus low voltage protection
14 F6 EXV1 fault
15 H1 Communication malfunction between main control board and inventer board
16 H2 Liquid refrigerant temp.sensor(T2) malfunction
17 H3 Gas refrigerant temp.sensor(T2B) malfunction
18 H4 Three times L0 protecs
19 H6 The DC fan malfunction
20 H7 Voltage protection
21 H8 HP pressure sensor malfunction
22 HA Outlet water temp.sensor (Tw_out) malfunction
23 Hb Three times PP protection and Tw_out below 7 °C
24 HF Inverter module board EE prom malfunction
25 HH 10 times H6 in 2 hours
26 HP Low pressure protection in cooling mode
27 P0 Low pressure switch protection
28 P1 High pressure switch protection
29 P3 Compressor overcurrent protection
30 P4 Comp discharge temp. too high protection
31 P5 |Tw_out-Tw_in| value too big protection
32 Pb Anti-freeze mode
33 PP |Tw_out-Tw_in| abnormal protection
34 Pd High temperature protection of air side heat exchanger temperature(T3)
35 L0 Inverter or compressor protection
36 L1 DC bus low voltage protection
37 L2 DC bus high voltage protection
38 L3 Current sampling error of PFC circuit
39 L4 Rotating stall protection
40 L5 Zero speed protection
41 L7 Phase loss protection of compressor