KAYO MOTOR TD125, Руководство по обслуживанию

Страница: 90 / 93

The engine will start, but it
will stall immediately
Incorrect air supply
Close the choke valve, clean the tank
ventilation pipe, and adjust the air filter
duct
The lack of fuel make-up fuel supply
The engine is running
unevenly
The spark plug is stained, damaged or
incorrectly adjusted Remove the spark plug, clean it, adjust
it, and replace it if necessary
something wrong with the spark plug
cap.
Check the condition of the spark plug
cap, check whether the spark plug cap
is in good contact with the cable itself,
check the cable, and replace the
damaged parts.
Ignition rotor damage Replacement of the rotor
The fuel was mixed with water Empty the fuel and fill it with new fuel
Engine underpower or poor
acceleration
problems with fuel supply Clean fuel system and check
dirt in the air filter Clean air filter and replace if necessary
Exhaust system damaged or leaking
Check whether the exhaust system is
damaged and replace the accessories if
necessary
Dirt in the carburetor nozzle Remove carburetor and clean nozzle
Damaged or worn crankshaft bearings Contact KAYO Service Center
Abnormal engine sound
Ignition problem Contact KAYO Service Center
Overheating See "Engine overheating" section
The exhaust pipe tempered
There is carbon deposition in the
combustion chamber Contact KAYO Service Center
Fuel inferior Replace the fuel
Spark plug in poor condition or wrong
specification Replace the spark plug with the correct
specification
The gasket of the exhaust system is
aged
Check whether the exhaust system is
damaged and whether the gasket is in
good condition. If the gasket is aging,
replace the gasket.
The exhaust pipe emits white
smoke
Fuel contains moisture
Replace the fuel
The exhaust pipe belched
black smoke
Air filter is blocked Remove and clean the air filter
The combustible mixture is too thick Adjust the carburetor valve
Transmission gears are not
engaged
Clutch anomaly Contact KAYO Service Center
The fork is bent or stuck Check and adjust the fork
Shift lever damaged Replace shift lever
The shift drum is damaged Replace the shift drum
Ratchet device is damaged Replace the ratchet device
The position spring of speed selector is
loose or broken Replace the speed selector position
spring
Gear beating
Fork worn Replace the fork
Gear groove worn Check gear and replace if necessary
Gear damaged Replace the gear
The displacement drum groove is
damaged Replace the shift drum
Fork shaft worn
Check fork shaft and replace if
necessary
The position spring of speed selector is
damaged Replace the speed selector position
spring
Clutch slipping Clutch disc worn Replace clutch disc